Egg Tray Heat Transfer Machine

Egg Tray Heat Transfer Machine

Machine Features:

1. Using PLC control system, easy to operate;

2. Photoelectric induction control with high precision;

3. Driven print head up/down by cylinder with high speed;

4. Driven worktable left/right by cylinder with pressure stabilizing oil cylinder to make machine stable working;

5. The front/back, left/right of worktable can set easily;

6. Printing pressure, temperature and time can set easily to get good printing quality;

7. Using imported electronic eye induction device to locate feeding & collecting heat transfer film ;

8. Feeding, collecting heat transfer film automatically, and can set ;

9. With good heat transfer printing quality;

10. Heat transfer print head can set up/down;

11. The heating tube adopts wrap-around heat conduction to keep the temperature of silicon roller head uniform.

12. Cast iron worktable with grooves, easy to install jig;

13. The lifting guild of machine is enlarged to enhance the pressure and ensure uniform pressure;

14. The frame for installing heat transfer film is thick to get better balance;

Technical Parameter:

Max print diameter (360 degrees printing):	150MM
Max print size (for flat products):	250*380MM
Silicon roller size	100*250MM (Diameter * Height )
Transverse Stroke	400MM
Max height of round bottles	250MM
Print temperature	Room ~280 degrees
Print pressure	≤300kgf
Print speed	900 - 1300 pcs/hr
Heating tube power	2800W
Air consumption	≤80 liter/min
Power supply	220V, Single phase
Air supply	5 ~ 7 Bar
Machine weight	260KG
Machine dimension	1300*1000*1900mm